2010 Chevrolet Cobalt
Mileage
134,623
Service Date
12/17/2021
Services Performed
- Pulled vehicle in and pulled codes from ecm, found multiple codes P0014 exhaust camshaft position system performance, P0300 engine misfire detected and P2135 throttle position sensor correlation. For code P0014 found engine oil low and dirty need to start with flushing engine oil system and retest. P0300 code could be caused by previous code, flush engine oil and change filter and retest. For code 2135 confirmed with scanner data that tps sensor are not reading correctly need to replace first and retest Note: vehicle has not been test driven due to being in limp mode after repairs are done need to retest systems and test drive vehicle Recommendations: Throttle body assy. Engine oil flush and filter change
- COURTESY CHECK / VISUAL INSPECTION
- THROTTLE BODY &/OR GASKET – Remove & Replace – 2.2L Eng – [Includes: Perform Relearn procedure.]
- PERFORM ENGINE OIL FLUSH WITH ADDITIVE
- THERMOSTAT – Remove & Replace – 2.2L Eng
CHARLES A. gave our service a 5 star review on 12/17/2021
